Laser interferometer:

Application: linearity, angle, perpendicularity, straightness, flatness, etc. It mainly measures the position accuracy of CNC machine tools.

Three coordinate measuring instrument

Applied in product design, mold equipment, gear measurement, blade measurement machinery manufacturing, tooling fixtures, steam mold accessories, electronic appliances, and other precision measurements.

Autocollimator:

Two-dimensional angle measurement and display at the same time, mainly testing the quality of machined parts (flatness, flatness, perpendicularity, parallelism, etc.)

Ballbar:

Mainly used for rapid detection of two-axis linkage accuracy of CNC machine tools and machine tool failure analysis.

Marble flat ruler:

As a reference surface for the inspection of instruments, precision tools, and mechanical workpieces, it is especially used for high-precision measurement.

Marble platform:

As a reference surface for the inspection of instruments, precision tools, and mechanical workpieces, it is especially used for high-precision measurement.

Marble angle ruler:

Marble angle rulers are used for the inspection of right angles, mainly for the inspection of high-precision machinery and instruments and the non-verticality between machine tools.

Marble Box:

The marble square ruler has a vertical and parallel frame combination for inspection of right angles. It mainly checks the high-precision machinery and instrument and the non-verticality between machine tools.

Digital Caliper:

This is a measuring tool mainly used for measuring length, inside and outside diameter, and depth.

Outside micrometer:

This is a measuring tool mainly used for measuring length and outer diameter.

Dial indicator:

The dial indicator is used to measure the geometric error and position error of the workpiece. It can directly perform precise measurements on geometric quantities such as length and displacement.

Torque wrench:

In order not to damage the thread, we need to control the amount of torque applied when tightening the screw fasteners such as screws, bolts, nuts, etc. Therefore, before using the torque wrench, firstly an upper limit of the required torque value should be set.

Frame level:

It is mainly used to check the guide rails’ straightness of various machine tools and other types of equipment as well as the horizontal and vertical installation positions of the equipment. At the same time, it is applied to the measurement of small angles, working surfaces with V-grooves, the installation parallelism of cylindrical workpieces, the horizontal and vertical installation  positions.

Feeler gauge:

The feeler gauge is used to measure the gap size. This method can be used to determine whether the measured size is acceptable.

Block gauge:

The block gauge is a high-precision standard length measuring tool and the benchmark for length measurement; it is used to measure precision workpieces and measure, adjust, and verify the correct size of other length gauges.